Sade RePomppa #62049, size 34
SadePomppa is a durable and lightweight raincoat for year-round use. The waterproof shell fabric and thin lining are made to withstand anything from drizzle to downpour!
- The product is like new.
- Condition: 1st class
RePomppa products have been previously used and owned. The quality materials and timeless design ensure a long life for our products. We hope that each Pomppa will be used to the very end of its life cycle, meaning the product may even be able to delight more than one owner in its lifetime. Every RePomppa has gone through our process of inspection and approval, so you can be sure that the products are high quality, undamaged and clean.
SadePomppa is a dog raincoat for year-round use. The waterproof and durable shell fabric protects the dog from rain, wind and dirt. The lining is made of smooth anti-static material which repels dog hair and debris.
The thin, non-insulated raincoat works as an all-purpose coat for dogs with thick fur. For cold-sensitive dogs, SadePomppa works better as a raincoat for warmer weather. The unique design ensures that the coat protects the dog’s back, neck, abdomen, and rear end without restricting their natural movement. Also, the simple design guarantees a good fit for all types of dogs, and is quick and easy to put on.
SadePomppa can be used individually as a raincoat, but it also works as an excellent shell jacket over a thermal layer, like JumppaPomppa. The light materials allow the coat to pack up small, so it’s easy to carry along for all kinds of adventures.
- Non-insulated and lightweight raincoat
- Silky-smooth lining repels dog hair and debris
- Full protection without restriction of movement
- Simple yet unique design is easy to put on
- Works as a shell jacket over JumppaPomppa
The size of Pomppa coats correspond directly to the dog’s back length in centimeters, which means the correct size is chosen by measuring the dog’s back length. However, depending on the dog’s proportions, the thickness of the dog’s fur, or the intended use of the product, the correct size may be size larger or smaller than what the back length indicates.
The units in the size chart are min and max measurements of the product. Note that due to the thickness of the materials, the coat’s waist measurement is recommended to be slightly larger than the dog’s waist circumference in order for the coat to sit comfortable on the dog. Depending on the dog’s proportions, the belt doesn’t necessarily set on the narrowest part of the dog’s waist.
Please note that this measurement table may not contain the size of the RePomppa product, as Pomppa sizes were updated back in 2018. This blog post has more information on the earlier sizes.
The picture shows where the measurements are taken. When measuring a thick-furred dog, be sure to leave extra room for the fur. If you have trouble deciding between two sizes, don’t hesitate to contact us.
- BACK – The back length is measured from the neck to the base of the tail. Start measuring from the meeting point of the neck and back.
- CHEST –The chest circumference is measured from the widest point of the chest.
- WAIST – The waist circumference is measured from the narrowest part of the dog’s abdomen
Here you can find our size recommendations for each dog breed. Please note that these are only approximate sizes. Your dog’s actual size may differ from the recommended size.
A B C D E F G H I J K L M N O P R S T V W Y
Materials
• Shell fabric: 100 % polyester
• Shell fabric water resistance: 5 000 mm
• Lining: 100 % nylon
Care instructions
• Gentle machine wash 30 °C
• Do not use fabric softener
• Do not tumble dry
• Do not iron
• Do not bleach
• Wash with similar colors
Water-repellency treatment
The shell fabric is finished with a DWR treatment, which keeps the fabric water-repellent. After washing the product, the DWR treatment must be reactivated. It’s done by heating the product in a drying cabinet, tumble dryer or in a sauna at 60 °C for a few minutes. The reactivation can also be done carefully with an iron at low heat and with a towel in between. Too much heat can ruin the DWR coating.
The DWR treatment also wears off over time. The product should be re-treated after water no longer beads up on the surface. The water-repellency can be restored using waterproofing products available at outdoor supply stores. Always follow the instructions found on the coating product’s label.
Note that the water-repellency does not affect the fabric’s water resistance. If the fabric gets saturated with water, the coat is still waterproof, but the moisture doesn’t evaporate through the fabric as effectively.
Reviews
There are no reviews yet.